router are connected the blue LED
stops flashing and remains ON
IP address discovery
If the DHCP or WPS is used to assign an IP
address to the camera then the IP address
will not be known to the installer, there are 2
recommended methods to discover the IP
address.
1. IP motion App
IP motion App - This is an Android or iOS
app which has a LAN search feature which
will seek out and display the IP address of
any cameras on the same network, also with
the added ability to view the live stream of
the cameras.
The Android app can be found in the Google Play
store, below is a QR code to easily find it.
The IOS app can be found in the App store, below is
a QR code to easily find it.
1.
Open the app and Press on the LAN
Search button for searching IP devices
connected to the LAN network
2.
A list of on-line camera will be
displayed, with the current IP address and
port number
3.
If a camera is selected then a detailed
view will be displayed.
4.
Pressing test will provide a snapshot in
order to confirm the camera view
5.
Pressing save will add the camera to
the
app’s camera view
6.
Selecting the required camera will
provide a live stream
2. IP Installer
This is a Windows PC application which will
seek out and display the IP address of any
cameras on the same network. It also
provides the ability to change the IP of the
camera. This software is free to download
from
1.
Run the installation programme IP
InstallerENG.EXE
2.
Select
‘Search Device’
Camera will be shown in the device list
3.
Select the camera
This will show the default details of the camera.
IP address, Subnet Mask, Gateway and Mac
Address
4.
Change name of the camera
5.
Change IP information if known
IP address, Subnet Mask, Gateway address and
DNS
6.
Change Static to DHCP
This allow the router to allocate a free address
to the camera
7.
Press Submit to save changes
Camera reboots
8.
Select Camera
IP address off camera assigned by router will
be displayed
Subnet Mask, Gateway etc. will also be
automatically filled out
9.
Change DHCP back to Static
Assigns a static address to the camera.
10. Press Submit to save changes
Camera reboots
Camera set up
Once the IP address is known then the installer
can configure the basic set up of the camera.
To access the camera, the Installer must enter
the IP address of the camera into a web
browser on a PC, Tablet or smartphone such as
Internet Explorer, Firefox, Safari, Chrome etc.
The camera will asked for a user name and
password;
The default username is: admin
The default password is: admin
Once the username and password has been
entered then the installer will be presented with
a live view of the selected camera similar to the
screenshot below.
Please note: to display the live feed then the
Browser will need to support ActiveX.
From the live view screen the Installer can
access the configuration screen by clicking on
the “spanner” icon.
Once in the configuration screens the Installer
can configure various options.
Panel & camera set up
When the IP address and HTTP Port number is
known it can be entered into the control panel.
The table below shows the requirements for the
alarm panel configuration for each of the 4
cameras:
Camera
triggers
When an event occurs within the system the
control unit will send a command to the camera
to carry out its action, the available triggers are:
Fire Alarm, Hold Up Alarm, Burglar Alarm,
Technical Alarm, Tampers, Duress Code, 24
Hour Alarm, Perimeter, Full Set, Part Set,
Unset, Zone follow & Zone Alarm
Zone
Follow
Only displayed if Zone follow is set to yes in
Camera Triggers.
Displays a list of programmed zones that can
be followed.
