CAM-EXT-00
External IP Camera
Introduction
The CAM-EXT-00 is a 1 / 2.7” Mega-Pixel CMOS
sensor IP camera with a built-in web server. The
user can view real-time video via IE browser. It
supports H.264, and M-JPEG video compression,
providing smooth and high video quality.
Supports Wired Ethernet connections and Wi-Fi
connectivity with a user friendly interface, it is an
easy-to-use IP camera for security applications.
The camera support a web interface that allows
authorised users access the camera menus and
change settings.
The only configuration of the Camera that the
Installer is required to do is set the IP address
and/or Wi-Fi settings and also set up the
image/focus.
The panel will configure all required settings for
visual verification of the camera once the IP
address of the camera has been entered in to the
panel.
Package contents:
1 x External IP camera
1 x 3 axis bracket
1 x screw package
1 x quick installation guide
Note: It is recommended you follow these
instructions and configure the device before
mounting it.
This product must be installed by qualified service
personnel.
Installing the unit
Connector instruction
Connect the power adaptor first, then connect
the IP Camera to PC or network, and set up the
network configurations according to the network
environment.
3-Axis Bracket
Use the 3-Axis bracket to adjust the camera to
appropriate angle, then turn and tighten the
screw to fix it.
Wireless antenna
(Optional)
Plug the Antenna into the connector on the
back of the camera unit while holding the
Antenna bar.
Turn the lock nut to the right until it is totally
locked. Do not bend or try to straighten the
antenna bar.
PoE (Power Over
Ethernet) (Optional)
802.3af, 15.4W PoE Switch is recommended
Power over Ethernet (PoE) is a technology that
integrates power into a standard LAN
infrastructure. It allows providing power to a
network device, such as an IP phone or a
network camera, using the same cable as that
used for network connection. It eliminates the
need for power outlets at the camera locations
and enables easier application of uninterruptible
power supplies (UPS) to ensure an operation of
24 hours a day, 7 days a week.
IP assignment
By default the camera will be configured to
obtain a DHCP IP address when plugged into a
DHCP enabled router.
If the camera does not detect a DHCP
connection then it will switch to a fixed IP
address of 192.168.0.200.
IP address discovery
If DHCP is used to assign an IP address to the
camera then the IP address will not be known to
the installer, there are 2 recommended methods
to discover the IP address.
1. IP motion App
IP motion App - This is an Android or iOS app
which has a LAN search feature which will seek
out and display the IP address of any cameras
on the same network, also with the added ability
to view the live stream of the cameras.
The Android app can be found in the Google
Play store, below is a QR code to easily find it.