UPS OPERATING INSTRUCTIONS
Eaton
Power Xpert 9395P UPS (300 kVA, 300 kW) Installation and Operation Manual
S
P-164000563 Rev 1
www.eaton.com/powerquality
7-17
7.3.13
System Status Screen and Controls
Press the
SYSTEM CONTROLS
pushbutton on the main menu bar to display the
System Status screen. Online operation, transfer to bypass, UPM start up and
shutdown, and LOAD OFF commands are controlled through this screen. In addition,
the screen displays the current status of the UPS, indicates whether the UPS is in
Maintenance Bypass or Bypass, and displays the state of the UPM. Figure 7‐25
shows the System Status screen.
Figure 7‐25. System Status Screen
Figure 7‐26 shows the Module Controls screen. This screen allows control of the
individual modules within the system. It also gives their values and status.
Figure 7‐26. Module Controls Screen
