Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
© 2022 Eaton
All Rights Reserved
Printed in USA
Publication No . IB48091 / TBG 001596
October 2022
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Instructions for Eaton’s AMPGARD®
NEMA 3R motor control center
Instruction Booklet
IB48091
Effective October 2022
DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY
The information, recommendations, descriptions and safety nota-
tions in this document are based on Eaton Corporation’s (“Eaton”)
experience and judgment and may not cover all contingencies .
If further information is required, an Eaton sales office should be
consulted . Sale of the product shown in this literature is subject
to the terms and conditions outlined in appropriate Eaton selling
policies or other contractual agreement between Eaton and the
purchaser .
THERE ARE NO UNDERSTANDINGS, AGREEMENTS, WARRANTIES,
EXPRESSED OR IMPLIED, INCLUDING WARRANTIES OF
FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY,
OTHER THAN THOSE SPECIFICALLY SET OUT IN ANY EXISTING
CONTRACT BETWEEN THE PARTIES . ANY SUCH CONTRACT
STATES THE ENTIRE OBLIGATION OF EATON . THE CONTENTS OF
THIS DOCUMENT SHALL NOT BECOME PART OF OR MODIFY
ANY CONTRACT BETWEEN THE PARTIES .
In no event will Eaton be responsible to the purchaser or user in
contract, in tort (including negligence), strict liability or other-wise
for any special, indirect, incidental or consequential damage or loss
whatsoever, including but not limited to damage or loss of use of
equipment, plant or power system, cost of capital, loss of power,
additional expenses in the use of existing power facilities, or claims
against the purchaser or user by its customers resulting from the
use of the information, recommendations and descriptions contained
herein . The information contained in this manual is subject to change
without notice .
