22
Instruction Booklet
IB48088
Effective July 2021
Instructions for Eaton’s 7.2 kV Ampgard AR
(arc resistant motor control center)
(Compliant to IEEE C37.20.7-2017)
EATON
www.eaton.com
Figure 24. Installing the plenums.
4. Install the reinforcement angle parts as shown in
.
5. Use hardware kit #25A4361G10 for the plenum section (front
and rear). Each plenum section will need one hardware kit to
complete the installation.
6. Use hardware kit #25A4361G11 for the left and right ends.
