background image

                    Open flap and mount
                    luminaire to surface
                    using the two fixing
                    holes (ø12.8mm) on the
                 back of the mounting arm
                 (as shown bottom right). 
               Once secure,
           wire terminations 
and place the flap back 
into position and secure 
with the two screws.

  Set the Aethon to face in the correct 

direction and fix into
position by tightening
the bolts from the bracket to the luminaire. 

Installation

B

Make terminal connections  

and fix end plate back into 
position.

Large

Small

A

20.0

80.0

ø20.0

ø5.0

100.0

ø20.0

ø12.0

  Fix bracket to surface using below 
fixing detail.

C

Large Yoke

Installation

Mounting Arm

Remove screws (x2) 

to release flap for 
           mounting arm.

38

0

.8

Installation

Pole Mounting Arm

Installation

Two Piece Bracket

Locate luminaire  

onto pole and lock 
into position with 
two bolts. 

Fixing Dimensions

10

6

.0

All values in mm

ø

63.9

ø

6.9 (x4)

31

.0

ø

9.0 (x4)

Set angle of bracket
and fix with a 
locking screw. 
Ensure holes
in the bracket
are aligned 
before 
fixing 
position

B

 Fix bracket to chosen surface. Use 
fixing details as shown below.

To the luminaire

To the surface

A

ø

31.0

ø

8.0 (x2)

5

0

.0

ø

20.5

16.1

74.0

Reviews: