6
GH5 Activeline Beacon Technical Manual
GH5 ACTIVELINE BEACON TECHNICAL MANUAL
TMF0075.A
www.eaton.com
Setting the operating modes (example: colour red)
rd
rd
rd
rd
5 6
5 6
5 6
5 6
Colour is continuously lit when activated
Colour flashes when activated
Colour blinks when activated
Colour is unlit, independent of whether signal is activated or not.
Operating modes
Each colour may be operated independently of the other colours in the operating modes continuous light, blink light or
flash light. The change of colour always takes place in the order green-yellow-red-blue-white.
Continuous light
When using only one colour, this colour is turned on continuously. When using more than one colour in the operating
mode „continuous light“ each colour is turned on for 990 ms. Then the changeover to the next driven colour takes place.
Example
The colours green, red and white are in use.
grün / green / vert / verde rot / red / rouge / rojo
weiß / white / blanc / blanco grün / green / vert / verde
990 ms
Blink
When using one colour, it will be lit for 220 ms and turned off for 275 ms.
275 ms
220 ms
When using several colours, the colour blinks twice, being lit for 220 ms and turned off for 275 ms.
1265 ms
Flash
When using one colour, it will be lit for 55 ms and turned off for 440 ms.
55 ms
440 ms
When using several colours, the colour flashes 4 times, being lit for 55 ms and turned off for 440 ms.
2420 ms
