DPD-9E2305
12
②
Load/equipment
status
middle buttons (
⯅
and
⯆
)
Description
BAT:xxx.xV xxx%
Battery voltage and charge
percentage
The BATTERY voltage screen tracks the charge level of your
connected battery bank in terms of voltage and charge
percentage.
RUNTIME:xxxMIN
Remaining battery runtime
The RUNTIME remaining screen tracks the approximate minutes
of runtime available under the current loading and battery pack
configuration. The runtime value will automatically re-calculate
as connected equipment power consumption changes.
EBM: x
External battery quantity
The EBM screen displays external battery quantity. This screen is
only for long time models.
DEMAND E:x.xxKWH
Demand energy
The DEMAND ENERGY screen offers continuous data on the KWh
(kilowatt-hour) that connected equipment has consumed in the
last one-hour period.
5.4 User settings
The following table displays the options that can be changed by the user.
Main Menu
Submenu
Available settings
Default settings
Control
Go to Bypass/ Go back
normal
The Go to Bypass menu is built to
give the user the ability to transfer
the UPS to bypass mode.
Battery Test
The Battery Test function initiates
a UPS self-battery test.
Reset Fault State
Reset Fault State command tries
to clear all the faults, but some
faults with a fault cause still
present cannot be cleared. Reset
Fault State is done in through
“reset fault state” menu.
Clear Event Log
Clear event log is used to clear
history log.
Reset Power Usage
Reset power usage is used to reset
the power used.
Restore Factory Setting
The Restore Factory Settings
provides the user a means to
restore factory settings through
the menu.
