Eaton 93E30KMBSB, User And Installation Manual

Page: 10 / 27

P-164000427
SMALL and LARGE BATTERY CABINET 4
Revision 2 User's and Installation Guide
• The operating environment should be maintained within the parameters stated in
this manual.
• Keep surroundings uncluttered, clean, and free from excess moisture.
• Observe all DANGER, CAUTION, and WARNING notices affixed to the outside of the
equipment.
1.4 Audience
The intended audience of this manual is people who plan the installation, install, and use the
UPS. This manual provides guidelines for checking the delivery, installing, and operating of the
battery cabinet.
The reader is expected to know the fundamentals of electricity, wiring, electrical components
and electrical schematic symbols. This manual is written for a global reader.
NOTE
Read the manual before operating or working on the UPS system.
1.5 CE marking
The product has the CE marking in compliance with the following European directives:
• LV Directive (Safety) 2006/95/EC
Declaration of conformity with UPS harmonised standards and directives EN 62040-1 (Safety) are
available at
www.eaton.eu/93PM or by contacting your nearest Eaton office or authorized partner.
1.6 User precautions
The only user operation permitted is:
• Switch ON or OFF the battery circuit breaker.
The user must follow the precautions and only perform the described operations. Any deviation
from the instructions could be dangerous to the user or cause accidental loss of load power.
WARNING
The user is not permitted to open any screws excluding the transparent hatch in front of
the battery circuit breaker. Failure to recognize the electrical hazards could prove fatal.