Eaton 9315P, Installation And Operation Manual

Page: 15 / 62

Introduction
Eaton 9315/9390/9395/9395P Fixed Primary Sync Control Installation and Operation Manual P-164000023—Rev 03 1-3
1.1 Conventions Used in This Manual
This manual uses these type conventions:
l
Bold type highlights important concepts in discussions, key terms in procedures, and menu options, or
represents a command or option that you type or enter at a prompt.
l
Italic type highlights notes and new terms where they are defined.
l
Screen type
represents information that appears on the screen or LCD.
In this manual, the term UPS refers only to the UPS cabinet and its internal elements. The term UPS system
refers to the entire power protection system – the UPS cabinet, the battery cabinet, and options or
accessories installed.
1.2 Safety Warnings
CAUTION
This manual contains important instructions that should be followed during installation and maintenance
of the UPS and batteries. Please read all instructions before operating the equipment and save this
manual for future reference.
The UPS cabinet is designed for specific harsh environment, industrial applications, and contains safety
shields behind the doors. However, the UPS system is a sophisticated power system and should be
handled with appropriate care.
DANGER
This UPS contains LETHAL VOLTAGES . All repairs and service should be performed by AUTHORIZED
SERVICE PERSONNEL ONLY . There are NO USER SERVICEABLE PARTS inside the UPS.
WARNING
l
The UPS system contains its own energy source (batteries). The output terminals may carry live
voltage even when the UPS is disconnected from an AC source.
l
To reduce the risk of fire or electric shock, install this UPS in a temperature and humidity controlled,
indoor environment, free of conductive contaminants. Ambient temperature must not exceed 40°C
(104°F). Do not operate near water or excessive humidity (95% maximum). The system is not
intended for outdoor use.
l
Ensure all power is disconnected before performing installation or service.
CAUTION
l
Keep the UPS doors closed to prevent the unwanted entry of metallic dust and to protect personnel
from dangerous voltages inside the unit.
l
Do not operate the UPS system close to gas or electric heat sources.
l
The operating environment should be maintained within the parameters stated in this manual.
l
Keep surroundings uncluttered, clean, and free from excess moisture.
l
Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of the
equipment.
Icon Description
Information notes call attention to important features or instructions.
[Keys] Brackets are used when referring to a specific key, such as [Enter] or [Ctrl].