manualshive.com logo in svg

Eaton 9155 UPS20-30kVA, User Manual

The Eaton 9155 UPS20-30kVA offers reliable power protection for critical equipment. Ensure smooth operations with its advanced features and intuitive interface. Access the comprehensive User Manual for this product, available for free download at manualshive.com. Discover all the functionalities and optimize your UPS performance effortlessly.

Share
Download
background image

User’s Guide UPS 20 - 30 kVA, 230 V 50/60 Hz output 

(3-phase input/1-phase output)

1026743 revision B

1. 

Safety instructions ....................................................................................................................................................................... 5

Audience ........................................................................................................................................................................................ 5
CE marking ..................................................................................................................................................................................... 5
User precautions ........................................................................................................................................................................... 6
Environment ................................................................................................................................................................................... 6
Inquiries .......................................................................................................................................................................................... 6

2 

Introduction ................................................................................................................................................................................... 7

System description ....................................................................................................................................................................... 7
Feature: Active-Front Technology .............................................................................................................................................. 7
Feature: Advanced Battery Management (ABM)™ ................................................................................................................ 8
Feature: Hot Sync

®

 technology .................................................................................................................................................. 8

Basic system configuration ......................................................................................................................................................... 9

3. 

Mechanical installation .............................................................................................................................................................. 10

Delivery check ............................................................................................................................................................................... 10
Unpacking and visual inspection ............................................................................................................................................... 10

4. 

Planning before installation ....................................................................................................................................................... 12

5. 

Cabinet installation  ..................................................................................................................................................................... 13

Maintenance bypass switch ....................................................................................................................................................... 15
External battery cabinet option .................................................................................................................................................. 15
Battery racks ................................................................................................................................................................................. 15

6. 

Electrical installation .................................................................................................................................................................. 16

Power cables and protective fuses ........................................................................................................................................... 17
Wiring procedure .......................................................................................................................................................................... 18
The installation procedure: ......................................................................................................................................................... 18
External Battery Cabinet (EBC) installation procedure .......................................................................................................... 21

7. 

Software and connectivity .......................................................................................................................................................... 22

Communication cables ................................................................................................................................................................. 22
Connection to the standard RS-232 port (X53) ......................................................................................................................... 23
LanSafe software .......................................................................................................................................................................... 23
External control connections ...................................................................................................................................................... 24
  Emergency Power Off (EPO) ................................................................................................................................................... 24
  Relay outputs ............................................................................................................................................................................. 25
  Programmable signal inputs ................................................................................................................................................... 25
XSlot communication ................................................................................................................................................................... 26
  Web/SNMP Module (optional) ............................................................................................................................................... 27
  AS/400 Relay Module (optional) ............................................................................................................................................. 27
  Single Serial Port Module (optional) ..................................................................................................................................... 28
  Modbus/Jbus Module (optional) ............................................................................................................................................ 28

Summary of Contents for 9155 UPS20-30kVA





















































Reviews:

No comments

Related manuals for 9155 UPS20-30kVA

R&D UPS Series Safety And Installation Manual preview
UPS Series
Brand: R&D Pages: 55
Tecnoware EVO DSP TM User Manual preview
EVO DSP TM
Brand: Tecnoware Pages: 44
East EA900IIRT 1000VA User Manual preview
EA900IIRT 1000VA
Brand: East Pages: 25
INFOSEC UPS SYSTEM S5 USB NEO User Manual preview
S5 USB NEO
Brand: INFOSEC UPS SYSTEM Pages: 8
INFOSEC UPS SYSTEM E6 LCD-RT User Manual preview
E6 LCD-RT
Brand: INFOSEC UPS SYSTEM Pages: 27
Xtreme TX91 User & Installation Manual preview
TX91
Brand: Xtreme Pages: 38
SmartPower SBP1000TBF User Manual preview
SBP1000TBF
Brand: SmartPower Pages: 13
Eaton 93E 30ITC Installation Manual preview
93E 30ITC
Brand: Eaton Pages: 74
Rittal PMC 7857.361 User Manual preview
PMC 7857.361
Brand: Rittal Pages: 55
OPTI-UPS Thunder Shield TS500D User Manual preview
Thunder Shield TS500D
Brand: OPTI-UPS Pages: 7
Xtreme Power Conversion 1000VA User Manual preview
1000VA
Brand: Xtreme Power Conversion Pages: 20
Aplus 10KVA User Manual preview
10KVA
Brand: Aplus Pages: 32
LESTAR MD-450E Quick Start Manual preview
MD-450E
Brand: LESTAR Pages: 2
IBM 2200VA LCD 2U User Manual preview
2200VA LCD 2U
Brand: IBM Pages: 20
Falcon SG800-1, SG800-2 SG1K-1T, SG1K-2T SG2K-1T Battery Replacement Manual preview
SG800-1, SG800-2 SG1K-1T, SG1K-2T SG2K-1T
Brand: Falcon Pages: 8
Xmart OPTIMA-RT10-10K User Manual preview
OPTIMA-RT10-10K
Brand: Xmart Pages: 48
ZGR INFLUENCE Operation Manual preview
INFLUENCE
Brand: ZGR Pages: 52
Eaton 91PS UPS 8-40 kW User And Installation Manual preview
91PS UPS 8-40 kW
Brand: Eaton Pages: 117

Brands by name

Popular brands

Load more brands