5
Technical Application Note
September 2014 www.eaton.com
8. Select the check box to the right of the RSSI service to
enable the RSSI service, and then click Next.
Check box
9. Complete the remaining steps in the wizard, and click
Apply when finished.
10. Go on to the next procedure to enable notifications.
Enabling notifications
The last configuration step is to enable NMS notifications in
so that the system will send an email or text message if a
fault condition is detected.
1. On the NMS screen, open the My Account page.
2. Set the notification preferences as shown in the
following screen.
For more information about notification preferences,
refer to the NMS users manual.
Checking 615M RSSI level and history
NMS offers several ways to check the RSSI level of a
specific 615M. You can view high-level status information by
displaying the Service Status page or the Network Topology
Map. You can also view RSSI levels over a period of days,
months, or years by generating a performance graph from
the Status Details page. To display the Service Status page,
click Service Status on the Details menu of the Home page.
otee:
N
Services are color-coded based on their status. For
example, red indicates “critical state” and yellow
indicates “warning state”. Look for the color key at
the top of the Service Status page.
Service Status Page
To view details about an RSSI service or to generate a
performance graph, click the service link within the Service
Status page to display the Service Status Details page.
Service Status Details Page
To graph the RSSI status over time, click the Performance
Graphs tab.
Performance Graph Tab (Service Status Details Page)
