10
5 Operation
5.1
Start-up and normal operation
Check that the indications on the name plate located on the back of the UPS
meets to the AC power source and the true electrical consumption of the
total load.
5.1.1
Battery charge
The UPS charges the battery as soon as it is connected to the AC outlet, whether
the ON/OFF button is pressed or not. It is recommended that the UPS be perma
-
nently connected to the AC power supply to ensure the best possible autonomy.
Button function:
1.
Buzzer mute:
Push the button for <2s to mute the buzzer temporarily when there is a fault occur
or battery test fail.
2.
UPS on/off:
Push the button for >2s, then to power on/off the UPS.
3.
Silence mode:
Let UPS working in the standby mode, then to push the button for >11s to enter
the configuration mode.
To start the UPS:
1. Verify that the UPS power cord is plugged in.
2.
There is a single buzzer indication.
3. Press the
button on the UPS front panel for few seconds.
Check the UPS front panel display for active alarms or notices. Resolve any active
alarms before continuing; if the
indicator illuminates in red, do not proceed
until all alarms are clear (see “Troubleshooting” section). Check the UPS status
from the front panel to view the active alarms. Correct the alarms and restart if
necessary.
