11
DO NOT REMOVE THE AZIMUTH SET SCREW COMPLETELY!
Loosen the screw just enough to be able to gently rotate the arm tube and set the azimuth to
the correct position.
The correct position can be checked from the front view, preferably with
the needle placed on a mirror placed on the platter. Once the azimuth setting is correct, gently
re-tighten the AZIMUTH SETTING SCREW.
Examples of incorrect azimuth setup:
Too much left angle:
Too much right angle:
The correct position is 100% perpendicular to the record.
f)
Anti-skating assembly and adjustment
Hang the loop of the thread of the anti-skating weight in the groove of the
anti-skating stub (8)
corresponding to the downforce applied to your cartridge and feed the thread through the loop
!
