易仕韦尔
EASYWELL
第
7
页
Fault symptom
Reason
Remove method
float
c) The float is damaged
b) Remove the foreign matter
c) Replace the float
No fog outlet
a) The voltage 5% lower than
the standard
b) The water is too hard
c) Too dirty in the tank
a) Check the power or the
current plate
b) Clean the water tank
，
replace
the clean water
c) Clean the tank.
Water exceed
from the tank
a) Leaking from the water tank
b) The fog poured backward and
the blower outlet overflow
a) Mend the tank or replace a
new one
b) Check the blower outlet
Fog capacity
became less or no
fog
a) Too much lime scale in the
tank
b) The atomization chip is too
aging
c) The voltage became lower
d) The water level is too high or
less than the standard
e) There are oil in the water.
a) Clean the water tank and the
atomization chip
b) Replace the atomization chip
c) Keep the standard voltage
d) Adjust the water level
e) Clean the water tank and the
pipe
Off-odor exist in
the fog
There is foreign matter in the
tank or in the pipe
Remove the foreign matter inside
6. Maintenance
1. Water tank maintenance: Please replace the water in the water tank regularly to
reduce the deposition of scale in the atomizer.
2. Water tank cleaning: clean the water tank regularly. Turn off and uplog the
machine before cleaning so as to avoid contact incident.
3. Cleaning method: Turn the fixing screw on the cover of the water tank, and open
the tank cover plate(please pay attention to the circuit connection inside), use a
