EN
EN - 12
Remove the seating from the frame (see the manual of easywalker MINI
stroller). Lift the carrycot by the two handles on the sides and place it on
the four bolts at the inside of the frame (image 43). If you hear four clear
“clicks” the carrycot is attached correctly. Always check whether the four
connections are fixed. Put the handles back into the side pockets of the
carrycot.
Detaching the easywalker MINI stroller carrycot from the frame
Engage the parking brake of the easywalker MINI stroller (image 17). To
remove the carrycot from the frame, pull the grip under the head end of
the carrycot. Carefully lift the carrycot by the handles. The carrycot will
come off (image 44).
TIP: The carrycot can be used as a cot without a supporting frame.
Mattress
The mattress of the easywalker MINI stroller carrycot has been specially
designed to let your child sleep hygienically and safely. It consists of a
foam layer and an air-flow layer. Always put the air-flow layer on top of
the mattress and cover it with the fitted sheet provided (image 45).
Mosquito net
The easywalker MINI stroller carrycot is supplied with a mosquito net.
Place the mosquito net over the carrycot so that it connects properly to
the carrycot (image 46).
Rain cover
IMPORTANT: The rain cover has ventilation holes. These ensure fresh air
to circulate, so do not block them.
IMPORTANT: Do not let your child sit under the rain cover unnecessarily.
Ensure that your child does not get too hot.
The easywalker MINI stroller carrycot is supplied with a rain cover.
Place the rain cover so that the ventilation window is by the opening of
the carrycot (image 47).
Make sure it connects properly to the carrycot.
