EN
EN - 4
the frame (see the manual of easywalker june).
Lift the carrycot by the two handles on the sides and place it on the four bolts at the
inside of the frame (image 12). If you hear four clear “clicks” the carrycot is attached
correctly.
Always check whether the four connections are fixed. Put the handles back into the side
pockets of the carrycot.
Detaching the easywalker june carrycot from the frame
Engage the parking brake of the easywalker june (image 11).
To remove the carrycot from the frame, pull the grip under the head end of the carrycot.
Carefully lift the carrycot by the handles. The carrycot will come off (image 13).
TIP: The carrycot can be used as a cot without a supporting frame.
Mattress
The mattress of the easywalker june carrycot has been specially designed to let your
child sleep hygienically and safely. It consists of a foam layer and an air-flow layer.
Always put the air-flow layer on top of the mattress and cover it with the fitted sheet
provided (image 14).
Mosquito net
The easywalker june carrycot is supplied with a mosquito net.
Place the mosquito net over the carrycot so that it connects properly to the carrycot
(image 15).
Rain cover
IMPORTANT!: The rain cover has ventilation holes. These ensure fresh air to circulate,
so do not block them.
IMPORTANT!: Do not let your child sit under the rain cover unnecessarily. Ensure that
your child does not get too hot.
The easywalker june carrycot is supplied with a rain cover.
Place the rain cover so that the ventilation window is by the opening of the carrycot
(image 16).
Make sure it connects properly to the carrycot.
Tip: The rain cover has reflective stitching so that you are visible to other road users in
the dark and during bad weather.
