EasyTravel – ET1B
User’s Manual
Rev. 0708
13
1. Plug the charging connector into the
EasyTravel
charging socket and
then connect the charger to an electrical outlet socket.
2. Plug the charging connector in the back of the battery pack and then
connect the charger to an electrical outlet socket.
During charging, the indicator light on the charger will be orange. When
the battery is approaching full charge the indicator light will turn green. In
order to achieve the maximum battery capacity and efficiency, it is ad-
vised to charge them overnight, and at least four hours after the indicator
light has turned to green.
Safety Instructions
CAUTION:
Failure to follow these instructions may result in personal in-
jury or property damage.
1. Never smoke or allow an open flame in the vicinity of the batteries.
2. Use the charger for charging lead acid batteries only. It is not in-
tended to supply power to an extra-low-voltage electrical system or to
charge dry cell batteries.
3. Never charge a frozen battery.
4. Do not operate the charger in a closed-in area or restrict ventilation.
5. Prevent external damage to AC and DC cords. Do not use charger if
cords are damaged.
6. Connect DC charging cord to the Charging Socket before connecting
charger AC supply cord to the electrical outlet, and disconnect the AC
cord from the electrical outlet before disconnecting charge cord.
7. Be extra cautious not to drop a metal object onto the battery case.
8. Remove jewellery.
Battery Storage
Before storage, battery packs should be fully charged, and should
be recharged at least once every three months.
Store batteries indoors in a dry environment.
Storage temperature range: -20ºC (-4ºF) to 40ºC (104ºF)
Charging temperature range: 0ºC (32ºF) to 40ºC (104ºF)
Operating temperature range: -20ºC (-4ºF) to 50ºC (122ºF)
Summary of Contents for Classic
Page 1: ......
Page 2: ...USER S MANUAL ...
