2
Installing NANO Slicing Software
This NANO 3d printer runs with our own developed slicing software called E3D NANO. It is installed
on the SD card which you can find in the accessories box. Please copy the file to your computer to
run the installation program and complete the installation.
3
Connect and Power The NANO
1, Plug the provided original NANO power adaptor into the power plug and the print button
indicator light should be on.
2, To power off the NANO 3d printer, unplug the power adaptor from the back of the machine
when it’s not operating.
4
3 Steps Easy Printing
4.1
Install 3D filament
Feed:
Insert filament into the guiding tube until it cannot goes further and gently press the filament to
stop it runs back. Then use another hand to slide the switch (at the back of printer) to ”Feed” gear
(As shown in figure 3).
The print button in front will flash green light at fast rate or at steady rate.
(figure 3)
Summary of Contents for NANO
Page 1: ...USER S MANUAL ...
