82
19. Loosen the knob on the upper body
support.
20. Place upper body support onto post as
shown. Depress spring button and place
into position.
21. Tighten knob securely.
Page 9
20
21
19
Page 30
If a Tilt Table (TT) model was ordered, skip to step 23.
If a Prone model was ordered, skip to step 29.
MPS and Supine
MPS and Supine
MPS and Supine
Leg Abduction
79. Loosen knob behind the pelvic pad.
80. Abduct each leg out to the desired
position up to 30 degrees per leg. Tighten
securely.
Face Aperature
81. To adjust the aperature height, loosen
the knob on the support bracket. Place into
desired position and tighten securely.
82. To adjust the angle or width of the
aperature pads, loosen the knobs and place
into desired position. Tighten knobs
securely.
79
80
81
