Shadow Tray Assembly
®
These assembly instructions are shown for the right side mounted Shadow Tray, for the left side
mounted Shadow Tray, installation will be on the opposite side .
Required Tools:
-13mm open end wrench -Hex Wrench
Mobile Frame
Narrow Clear Angle
Adjustable Tray for Mobile
PNG50327-1
Place tray onto the tray post, insert nut into
slot and bolt into hole, tighten securely.
NOTE: Raise the Angle Tray by pulling up on the front of the tray and it will lock into
position, to lower the tray, angle the tray all the way up and the mechanism will be-
come free to lower the tray.
Column Frame
Black Molded Angle
Adjustable Tray
PNG50368-1
Column Frame
Angle Adjustable Clear Tray
PNG50366-1
Swing-Away Frame
Black Molded Angle
Adjustable Tray
PNG50490-1
Swing-Away Frame
Clear Angle
Adjustable Tray
PNG50489-1
Swing-Away Front
Oversized Angle
Adjustable
Clear Tray
PNG50491-1
7
16
1. Remove nut and lock
washer from the bolt on the
support arm
2. Insert bolt and support arm
onto unit as shown, making
sure notch is in the groove on
the support arm.
3. Start the bolt by hand.
4. Place lock washer and nut
onto bolt. Using a hex tool and
wrench tighten securely.
5. Place the tray bracket on
the unit as shown. Insert one
bolt and hand tighten.
6. Insert second bolt and tighten
both bolts securely.
