background image

Evolv Adjustable Shadow Tray

Assembly

Customer Service

800.342.8968      507.697.6393

Required Tools:

-13mm open end wrench

-Hex Wrench

1. To install the support arm, first remove the nut and the washer from 

the pre-assembled bolt on the arm, leaving the bolt and the two halves 

of the fitting (one plastic and one metal) in place on the tube. Thread 

the bolt into the hip plate. Once the bolt has been secured and the 

support arm has the desired level of tension, install the nut and lock 

washer on the bolt protruding through the opposite side of the hip 

plate, closest to the user. Use either the small end of the wrench from 

the supplied tool kit, or a 17mm socket wrench (preferred) to securely 

tighten the nut.

A setscrew in the metal half of the support arm fitting may be used 

to adjust the level of the tray once the installation is complete.

2. Place the tray bracket on the unit 

as shown. Insert one bolt and hand 

tighten. 

3. Insert second bolt and tighten both 

bolts securely.

4. Place the cloth protection sleeve on 

the tray bracket as shown.

Set 

Screw

5. Insert tray tube into the tray bracket.

6. Insert bolt into desired hole. 

Note: You may need assistance lining 

up the hole from a partner. 

7. Place washer onto bolt.

Reviews: