10 . With assistance, insert the following arm
onto the tube with the color strips on the unit
until the red color setting is reached on the
following arm indicator area knotch.
11 . Install the screw that was removed onto the
following arm and tighten securely. Flip the gray
tab closed and tighten knob securely.
12 . Remove a bolt, wagon wheel plastic washer,
metal washer and nut from the parts bag. These
will be used on the hip pivot.
Page 4
31 . Lock the casters, loosen the knobs on the
tray receiver all the way, then flip open gray tabs
until it clicks. Insert the two tray arms into the
tray bracket on the bottom of the tray as shown.
32 . If the swing away shadow tray was ordered,
using a wrench, remove the nut from the bolt on
the tray arm and discard the nut. Make sure all
other hardware stays on the bolt.
33A . Flip the tray arm as shown.
33B . Place the ratchet handle onto the bolt and
tighten securely.
Repeat steps for the other side.
Page 11
Following Arm Notch
Hip Pivot Bracket
33A
33B
Knobs