background image

29A

29B

13 . With assistance, position the back in the slot 

on the seat as shown.

14 . Line up the holes and place the wagon wheel 

plastic washer between the hip pivot bracket and 

the slot on the seat, insert bolt from the inside of 

the unit. 

Repeat these steps for the other side of the unit.

15 . Place the metal washer and lock nut onto the 

bolt.

Page 5

28 . Place nuts onto bolts, remove nut caps. 

Tighten nuts securely and replace caps. 

29A . Run the cables inside the adjustment 

wheel. Insert tie strap into hole

Note: Tie Strap will be in a bag on the controller.

29B . Do the same for the other side. Line cable 

clip up with hole on unit. Insert tie strap and 

tighten. Trim excessive strap and turn cut end 

inward.

Do not twist cables when installing 

controller . 

For controller usage see pg. 23 in the 

Instructions For Use manual. 

30 . If the optional Shadow Tray was ordered, 

place the tray upside down as shown. Flip the 

chrome arms as shown, remove 4 bolts from bot-

tom of the tray. Place arm brackets onto tray and 

line up holes in arm bracket with holes on the 

tray. Insert 4 bolts and tighten securely.

If the optional Swing-Away Tray was ordered skip 

to step 32.

Page 10

Adjustment Wheel

Summary of Contents for Bantam Y5500 Medium





















Reviews: