Adjust according to your height
Open the Vario 5 cover using the tension
adjustment tool mounted on the power
pack. Use the same tool to loosen the
hex column nuts in each corner of the
back plate.
DO NOT REMOVE THE NUTS FULLY.
Slide the power pack up/down to desired
position.Tighten the 4 nuts and replace
the cover.
Locking the arm in 90 degrees
1. Place one hand on the end of the
STABIL G3 arm and place one finger
on the locking lever.
2. Press the arm downwards while applying
slight pressure to the locking lever.
Press the locking lever towards the
adjustment knob.
3. At 90 degrees the lever will lock into
position and make a click sound.
Taking a look at when the stickers align on
the side plates it will make it easier for you
to lock the STABIL G3.
4
5
6
Adjusting the slider
Place the camera hook in front of the
upper arm (1). Adjust the slider (2) to
preferred location and lock it tight. When
the slider is in position, gently put back
the camera hook.
The Easyrig STABIL G3 has ball bearings
in the back of the arm, enabling smooth
lateral movement from left to right within
80 degrees without friction. This smooth
lateral movement together with the spring
(up and down) will make your shots
steadier.
Scan QR-code
for more info
LOCK
LOCK
Design Protection USA / EU / INDIA / CHINA:
DM/203947, 79612 & (ZL)201930512717.8
Trademark USA / EU / INDIA / CHINA: Pending
