Easyrig Mini Instructions Download Page 2

Page: 2 / 4

2. Remove the plastic cover on the camera hook

and open the knob.

3.Remove the spring balancer by opening the

M4 x 35 mm screw.

4. Put the new feather package in position.

5. Inside the spring balancer is a loose wheel. It’s

important to have it in correct position. By using

the hexagon you can keep the wheel in position.

6. Mount the M4 x 35 screw. When the screw is

through the nut it’s perfect, otherwise the cover can

bend.

7. Mount the line through the arm by using the

spring cord tool.

8. Mount the line through the bend arm over

the wheels.

9. Mount the line through the adjustment block.

1. Remove the plastic cover by

removing the four knobs. Take out

the support bar.

Summary of Contents for Mini

Page 1: ...Screwdriver Hexagon keys 4 mm and 5 mm Universal screw spanner Spring cord tool Changing the Easyrig Mini spring balancer Changing the Turtle X spring balancer Tools that are needed Screwdriver Hexagon keys 4 mm and 5 mm Universal screw spanner Spring cord tool ...

Page 2: ...opening the M4 x 35 mm screw 4 Put the new feather package in position 5 Inside the spring balancer is a loose wheel It s important to have it in correct position By using the hexagon you can keep the wheel in position 1 Remove the plastic cover by removing the four knobs Take out the support bar ...

Page 4: ...10 Drag the line through the hook cover and the hook and make a knot in the end 11 Apply black tape to cover up the knot 12 Apply glue inside the hook cover to make it stick to the hook www easyrig com ...