Oslostrasse 5, CH
–
4023 Basel
Tel. +41 [0]61 333 70 33, Fax +41 [0]61 333 70 32
www.easyrain.net [email protected]
Brunner Bewässerung - Arrosage
Gebrauchsanweisung Steuerung ESP-TM
13
Use Manual Start / Advance
Select the program you want to start. Press the A / B
(or PGM) button to switch back and forth between the
two programs.
Press the MAN START / ADV. button to begin the
program with the first assigned station. To advance
through the stations in the program, press MAN
START / ADV. repeatedly until the station you want
is displayed.
1
2
ESP-TM Installation and Operation
Page 23
Run Test Program
The ESP-TM controller has a built-in test program that
will run each station in sequence for two minutes. You
can use this program to check out the operation of all
the sprinklers in the system.
3
2
1
Turn the dial to AUTO.
Press both arrow buttons at the same time and hold
them down until...
The display shows the first station number and two
minutes of watering time remaining. The controller will
run each station for two minutes and then return to
AUTO mode to await the next scheduled start time.
Any station that has been set to a 0 run time will be
skipped during the test program.
ESP-TM Installation and Operation
Page 24
