easyRAID S8A2-PER2, Hardware User Manual

Page: 27 / 30

easyRAID S8A2-PER2 Serial ATA II Disk Array Systems
17
3
M
ain
te
na
n
ce –
Up
gr
a
din
g Me
m
or
y
Upgrading Memory
The disk array system takes a single DDR 184pin DIMM with a maximum capacity of 1
GB. Follow these instructions to upgrade the memory.
1 Remove the screws from the disk array system top cover and pull theDIMM
retaining away, the DIMM springs out of the socket. Remove the DIMM.
2 Gently push the new DIMM into the socket, then push the corners of the DIMM
down. The DIMM is secured by the DIMM retaining clips. Please the top cover
on the disk array system and replace the screws to fix the cover.
Note
The DIMM module will fit in only one direction. Do not force the
DIMM into place.
FAN 2/4
FAN 1/3
P/S 2
COM
HOST 1
COM
LAN
FAN 2/4
FAN 1/3
P/S 2
COM
HOST 1
COM
LAN