easyRAID ERP12R-10GR2 Quick Installation Manual Download Page 19

Page: 19 / 19

ERP12R/S &

ERP16R/S

Understanding LCD Front Panel-JBOD

Key

Description

7 Segment

• Blue - It indicates the chassis ID.

Fan

• Green - Fan modules are installed and working properly.

• Red - This system has a fault Fan.

Temp

• Green - System temperature is working properly.

• Red - System temperature is abnormal.

HDD

• Green - Installed disk are working properly.

• Red - It shows the system has a fault hard disk.

Power

• Green - System power supplies are installed and working properly.

• Red - This system has a fault power supply.

IO#1 RDY

• Blue - It indicates JBOD controller #1 is installed and working properly.

IO#2 RDY

• Blue - It indicates JBOD controller #2 is installed and working properly.

IO#1 ACT

• Blue (flash) - It indicates host is accessing the data via JBOD controller #1.

IO#2 ACT

• Blue (flash) - It indicates host is accessing the data via JBOD controller #2.

Power

ID#

IO#1

Fan Temp HDD

RDY ACT RDY ACT

IO#2

LED

LCD Panel

Summary of Contents for ERP12R-10GR2




















Search results

Summary of Contents for ERP12R-10GR2

Reviews:

Related manuals for ERP12R-10GR2

Brands by name

Popular brands

easyRAID ERP12R-10GR2, Quick Installation Manual

Search results

Summary of Contents for ERP12R-10GR2

Reviews:

Related manuals for ERP12R-10GR2

Brands by name

Popular brands