background image

7

The EasyPro Pond Skimmer will catch leaves and other floating debris that fall into the 

pond. The pump is located inside the skimmer and as water is pumped out of the skimmer, 

new water is drawn in from the surface of the pond. This will create a skimming action that 

will draw floating debris into the large debris net inside the skimmer. If the debris net be-

comes full of debris then water will not be able to reach the pump. You will need to empty 

the debris as needed. This will vary depending on the season from once every couple of 

weeks in the summer to almost daily in the fall if your pond is near a tree. In addition to 

the debris net, your skimmer will have either a filter pad or filter brushes as a second form 

of filtration. This stage of the filter is designed to trap fine debris and can be lifted out and 

rinsed clean as needed. Failure to do this will result in the pump being starved for water and 

could cause pump damage due to overheating.

The AquaFalls Filter is your biological filter. After the water is pumped from the skimmer 

(where mechanical filtration occurred) it then goes to the AquaFalls biological filter. Millions of 

beneficial bacteria will attach themselves to the media inside this filter and “clean” the wa-

ter as it passes through. This filter will require minimal cleaning since most large debris was 

removed before it got to this filter and the bacteria are consuming the nutrients in the water. 

Usually once per year is all that’s needed for cleaning of this filter. A good time for this is in the 

spring when you are doing your spring cleanup of the pond. Each filter has black bags that are 

filled with filter media. These bags can be lifted out and hosed off. The media does need to be 

taken out of the bag. Under the media bags are filter pads. These pads can also be lifted out 

and hosed clean. Over time these pads will need to be replaced (usually every two to three 

years). It is not recommended that this filter be cleaned too often 

since you will wash off some of the good bacteria when cleaning the filter media.

Many different pumps are used in EasyPro pond kits depending on the size of the pond and the 

amount of lift needed for the waterfall. All of the pumps are designed for continuous duty operation and 

can be left running 24 hours a day. It is important to operate the pump continuously since the bacteria 

in the filter need to have oxygenated water passing through the filter to keep them alive. Because the 

water is pre-filtered by the skimmer, you should have very little trouble with 

the pump plugging. If you do need to remove the pump to inspect it, simply 

loosen the clamp on the rubber coupling and remove the pump. The water 

from the filter will drain backwards when the pump is removed. This is not a 

problem for the bacteria if you inspect a pump for a few minutes.

Fish and Plants are an important part of the overall pond ecosystem. Fish 

add color and life to the pond. It is very relaxing to sit and feed your fish 

at the end of a long day. Koi will actually eat some types of algae and will 

eat mosquito larvae and insects. Koi and goldfish are popular choices for 

adding personality to your pond. These fish are hardy and can survive northern winters (see winter-

izing your pond for more info). Providing you do not overstock your pond, the fish can survive on 

the natural food that is present in your pond. However, feeding your fish is fun and relaxing! Just be 

sure not to overfeed your fish as the uneaten food is high in nutrients and will cause water quality 

MAINTENANCE INFORMATION

Thank you for purchasing an EasyPro pond system! Rest 

assured you purchased one of the best built and easiest to 

maintain water feature systems on the market today. Like a 

pool or a hot tub, your pond will require some maintenance. 

Unlike pools and hot tubs, you will use natural products 

instead of chemicals to maintain your pond. Following are a 

few guidelines to help you achieve maximum enjoyment.

The heart of your pond system is the skimmer, pump and 

AquaFalls filter. Together these components will remove 

debris, filter the water and create circulation.

Summary of Contents for PRO SERIES









Reviews: