26
EPT033789 Issue 2 February 2018
Position
X-Offset
-Moves the print position across the print head (the X Axis). By entering a minus
value the print will be moved towards the rear of the printer, and entering a positive value will
move the print towards the front of the printer.
Note: The width of the print head must not be exceeded.
Y-Offset
-This is the gap before the message (the Y Axis), it must take into account the head
down time. Generally, this is set prior to installation and should not need adjusting.
Start Pulse Offset
-Use the Start Pulse offset to adjust the position of the print along the Y
Axis.
This function displaces the print in the Y Axis (adds the offset to the Y Offset), but also allows
the printer to receive a start signal from the packing machine “sending signals” in the middle
of printing.
Saved With Message
Here the user can save specific settings with a message simply by ticking the feature’s
tickbox. If the feature is not ticked, the software will use the Global Print Settings.
Y-Offset
Start Pulse
Offset
Print go from
packing machine
+ve
X-Offset
-ve
X-Offset
