12
Switching between the modes
Please use the
Mode Button
to switch between the 3 modes.
Each press of the mode button engages the next mode in the cycle.
Note:
If you short press the button twice, the gimbal will return to
the start position.
1st mode: FOLLOWING MODE
(standard mode when switched on)
All axes are free.
All movements follow the movement of the handle.
2
nd
mode: PAN FOLLOW MODE
Tilt axis and roll axis are blocked.
The pan axis rotates and follows the movement of the handle.
3rd mode: LOCK MODE
All axes are locked.
The camera is stable. It does not follow the movement of the handle.
FOLLOWING
MODE
PAN FOLLOWING
MODE
LOCK
MODE
Single press the
mode button
Single press again
Single press again