Easypix DVC5016HD, User Manual

Page: 5 / 201

3
Put the cover back. 4.
* When using a brand new memory card, you are recommended to format the card with the
camcorder or other devices.
* The camcorder will use the inserted memory card as the main storage medium. Only when the
inserted card is removed will the fi les stored in the built-in memory become accessible.
Using the USB adapter ( )
Connect one end of the adaptor to the camcorder and the other end to a power outlet.
When the USB adaptor is plugged successfully, the following circumstances will occur, according to
speci
fi cations of the camcorder:
Camcorder supplied with lithium battery
Please charge the battery at least 8 hours for fi rst time use.
Connect one end of the supplied AC adapter to the USB port of the camcorder and the other 1.
end to a wall outlet.
OR
Connect one end of the supplied USB cable to the USB port of the camcorder and the other end
to a powered PC. Make sure the camcorder is powered off.
The charging LED turns red and the charge starts.
2.
When the charging is interrupted or the battery pack is fully charged, the charging LED will turn 3.
green.
Attaching and adjusting the wrist strap
Attach the strap to the strap holder on the front of the camcorder, then attach the other end to the
strap holder on the back of the camcorder, as shown in the illustration.
Open the cloth of the wrist strap. 1.
Adjust the length of the strap according to your palm size. 2.
Close and af fi x the cloth of the wrist strap. 3.
When using a PC to charge the battery, do not power on the camcorder, or the charge
will stop.
For select model only. Please refer to the package printing for detailed specifi cation.