Move the laminator to where the machine will be situated, please note all 4 wheels must be on a
level floor for the roller pressure to be level.
To check the roller pressure, place a small piece of card in the centre of the roller and lower the
roller down. Once in the down position check the gap in between the rollers on the left and right,
these should be the same, if not please see the next page.
If the rollers are level, please put the side covers back onto the laminator.
Once the side covers are on please put the lifting handle and key in place and secure using the bolt
provided.
Summary of Contents for SIGN
Page 1: ...ASSEMBLY INSTRUCTIONS...
