4).
Untighten the screw above to loosen the bevelled gear.
5).
Take off the bevelled gear.
Rotate the pressure regulating shaft to make the upper roller rise slightly. Conduct visual
observation and measure the gap between left and right sides of upper and lower rollers. If
the left gap is larger, rotate the gear in the below picture (when rotating clockwise, the
roller rises; when rotating anticlockwise the roller declines, each tooth will change the
height of 0.02mm) rotate the gear until the roller declines to the height required.
Once the rollers are set, follow the instructions in reverse to put the machine back together.
Summary of Contents for SIGN
Page 1: ...ASSEMBLY INSTRUCTIONS...
