Page 13
Technical Documentation EASYRO
®
Water Treatment Systems© 2015 easymetal GmbH.
This information is subject to copyright laws and may not be reproduced or changed without express written permission of easymetal GmbH.
CONTROL ELEMENTS AND FUNCTIONS
EASYRO
®
60 / 120 / 240 / 480
System during production
Displays Con = electrical conductance value in µS/cm
1
Scrolling display for operating hours left until maintenance is due
(Maintenance is due after 4500 operating hours)
Indicator bar: tank filling level for unpressurized tank
pressure indication in bar for pressurized tank
EASYRO
Production
Con: 60
bar 5
(Pressure vessel)
Maintenance:489
EASYRO
Production
Con: 60
Maintenance: 3489
Control Elements and Keys
Left arrow
Right arrow
Down arrow
Up arrow
ESC
OK
EASYRO
We 11:12
Stand by
bar 5
(Pressure vessel)
2016 - 09 - 16
Display shows “STAND BY” mode
(The system is not in production mode – possibly the tank is full)
The fill level is displayed as a bar on the left side of the display
or pressure indication in bar for pressurized tank
Day of the week and time
Scrolling “Ready”
Date
ESC + right arrow = INFO
Displays software version, motor hours and operating hours
(Do not press longer than max. 5 seconds. Pressing this longer starts
the “Suction Membrane Cleaning” programme
S = shows the remaining operating hours until the next maintenance
(from 4500 downwards)
M = shows already passed motor hours
Firmware = shows software version
EASYRO
S 3489
M 51h26m
Firmware 2.0
Changing date and time
ESC = SETTINGS - DATE
Select menu option SETTINGS, select date and use the arrow keys to
set the time. Save with OK.
Set time
Tue 13:10
YYYY-MM-DD
2016-08-05
Dislay color
Withe: System active
Yellow: Warning/Information
Red: Alarm
