23
EN
Cleaning and Storage
PLEASE NOTE!
■
Before commencing the cleaning, note the safety instructions in the "General Power
Tool Safety Warnings” chapter!
• Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface. Wipe down the device with a soft damp cloth if necessary.
• Keep the power tool out of the reach of children and animals in a dry, clean, frost-free
place which is protected from direct sunlight.
Troubleshooting
If the power tool does not work properly, check whether you are able to rectify the
problem yourself. If the problem cannot be solved with the steps that are listed, contact
the customer service department.
Do not attempt to repair a defective power tool yourself!
Problem
Possible cause
Fix
The object is not
in
fl
ated.
Is air escaping at the connec-
tions between the air outlet
opening (
10
), compressed air
tube (
8
), adapter (
4
) or valve?
Check the connections and
twist them tight.
Is the battery pack (
5
) too
weak?
Charge up the battery pack.
The device cannot
be switched on.
Is the battery pack not insert-
ed in the device correctly?
It must engage audibly.
Is the battery pack empty?
Charge up the battery pack.
The battery pack is
not charging up. The
control lamp of the
charging station is
not
fl
ashing.
Is the battery pack not in-
serted in the charging station
correctly?
Plug in the battery pack.
Are the plugs not connected to
the charging station and plug
socket correctly?
Correct the connections.
If the control lamp of the
mains adapter is not
fl
ashing,
there is no mains voltage.
Try another plug socket or
check the fuse of the mains
connection.
