21
EN
Problem
Possible cause
Fix
The article is not
displayed to the
audio source on the
Bluetooth
®
menu.
The article is switched off.
Switch on the article via the
wall switch.
The article is already
connected to another audio
source.
Decouple the connected
audio source via the terminal
device itself and then couple
the new audio source to the
article.
There is no playback.
The article is not switched on.
Switch on the article via the
wall switch.
The article is not coupled to
the audio source.
Couple the article to the
audio source (see the “Use”
chapter).
Playback has not been
started via the audio source.
Commence playback via the
audio source.
The volume setting is too low.
Set the volume on the audio
source higher.
The LEDs do not light
up.
The article is not switched on.
Switch on the article via the
wall switch.
The light has been switched
off via
the remote control.
Switch on the light using the
button
I EIN
(on) (
a
),
(
c
),
(
d
),
(
e
) and
(
f
) on
the remote control or switch
the wall switch off and back
on again.
The colours are
hardly discernible.
The white light is still
switched on.
Switch off the light via the
button
O AUS
(off) (
a
) on the
remote control and only then
select a colour mode (see the
“Use” chapter).
