25
EN
Troubleshooting
If the device does not work properly, check whether you are able to rectify the problem
yourself. If the problem cannot be solved with the steps that are listed, contact the cus-
tomer service department.
Do not attempt to repair a defective
electrical device yourself!
Problem
Possible cause
Fix
The device does not
work. / The device
cannot be switched
on.
The mains plug is not inserted
correctly in the socket.
Correct the
fi
t of the mains
plug.
The socket is defective.
Try another
socket.
No mains voltage is present.
Check the fuse of the mains
connection.
The On / Off switch (
5
) is in
position
O
.
The On / Off switch must be
in position I so that the device
can be switched on via the
control panel (
9
) or the remote
control.
The fuse in the fuse
box is triggered.
Too many devices connected
to the same circuit.
Reduce the number of devic-
es in the circuit.
No error can be identi
fi
ed.
Contact our customer service
department.
The device has not
been set automatical-
ly despite the timer
being set.
The timer setting has not
been con
fi
rmed via the
WEEK / TIME
button (
30
).
The
WEEK / TIME
button
must be pressed at the end
of the timer setting process to
save the settings.
The device does not
heat up.
The heating function has not
been switched on.
Switch on the heating function
via the remote control or the
control panel (see the "Use"
chapter).
The ambient temperature is
above the set temperature.
Set a higher temperature for
the heating function.
During use, an
unpleasant smell is
detected.
The device is being used for
the
fi
rst time.
There are production residues
in / on the device. This is nor-
mal and will not occur again.
Make sure that the room is
well ventilated!