EN
24
• The device heats up via heating coils and a fan. As soon as the set temperature is
reached, the heating coils stop heating and the fan switches off. As soon as the am-
bient temperature drops back below the set temperature, the heating coils and the
fan switch on again.
• The fan will continue to run for around 10 seconds once the heating function has
been switched off.
Lighting
• The
“
fi
replace look” lighting can be set to four brightness levels. They are shown on
the display via the symbol
(
20
).
• Press
the button (
25
) to set the brightness level you want (from bright to dark).
Timer
• For each day of the week, it is possible to set a time at which the device will switch
on automatically.
• The device will adopt the brightness and heating level set most recently.
• The device must be manually switched to stand-by mode.
1. Press the
WEEK / TIME
button (
30
) to access the timer menu. The symbol for setting
the time
fl
ashes on the display.
2. Press the
DAY
button to access the day setting. Set the day you want using the
+
and
–
buttons.
3. Set the time you want in the same way using the
HOUR
and
MIN
buttons.
4. Repeat this setting for other days if necessary.
5. Press the
SET UP
button (
29
) to switch on the timer.
ON
(
19
) appears on the display.
Press the
WEEK / TIME
button again to con
fi
rm the settings and exit the timer menu.
6. To switch off the timer, press the
WEEK / TIME
button to access the timer settings
again. Then press the
SET UP
button again until
OFF
appears in the timer display.
Cleaning and Storage
PLEASE NOTE!
■
Switch off the device, pull the plug out of the plug socket and allow the device to cool
down before doing any cleaning.
■
Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
• Dust down the housing of the device if necessary or wipe it down with a damp cloth if
necessary. Then wipe it dry with a dry cloth.
• Clean the glass panel with a standard commercial glass cleaner. Then thoroughly
wipe it dry.
• When not in use, the device should be stored in a clean, dry place which is protected
from dust and is not accessible to children and animals.