39
Chapter 4: Meter Memory, Setup
Memory, Storing Test Results
Your meter stores a maximum of 480 test results with the time and date of the test. You can review
them at any time. When the memory is full, the oldest result is dropped as the latest is added, so it is
very important to have the correct time and date set in the meter.
1. Do not change your therapy based on one individual result in memory.
2. The memory is not lost when you replace the battery. You do need to check that the
time and date are still correct. See Section "Setting The Time And Date" in Chapter 1.
3. Once 480 results are in memory, adding a new result causes the oldest one to be
deleted.
4. If you don’t set “CS” mode, control solution values will be included in the memory and
averages. Setting the meter in control solution mode will prevent the control solution
reading from being added to your memory and averages.
