everyday solutions
™
Est. 1992
LISTING TO A TAPE
GENERAL OPERATION
Slide the function switch (20) to “SOURCE” position, the LCD display (2) will show “PLS SELECT
FUNCTION” then press the tape button (11).
CASSETTE PLAYBACK:
The system will start playback automatically after insertion of the
cassette tape.
STOP AND EJECT:
Press the “TAPE FORWARD / EJECT” button completely inward
and the cassette tape will stop playing and be ejected.
FAST FORWARD:
Press the “TAPE FORWARD / EJECT” button half in during
playback and the tape will start fast winding forwards.
The “TAPE FORWARD / EJECT” button will keep at middle
height position, slightly press the “TAPE FORWARD / EJECT”
button again to resume normal playback. The “TAPE FORWARD /
EJECT” button will resume to the highest position.
NOTE:-
- Make sure the direction is correct when inserting the tape into the system.
Some searching noise can be heard during fast forward mode, return to normal play mode to
listen to the tape.
- It is recommended to remove the cassette tape from the system every time after listening and
not to leave the cassette tape inside the system when not in use.
PHONO
OPERATION
Remove the stylus protector.
Be sure that the tone arm lock is disengaged from
the tone arm before operating and re-secured again after use.
1) Slide the function switch (20) to the “SOURCE” position.
The LCD display (2) will show “PLS SELECT FUNCTION”,
press the phono button (13).
2) Set the speed selector (39) to the appropriate position
depending on the record to be played.
(continued overleaf)
