EasyIO FS32 – User Reference v1.4
16
Changing IP address
By default the EasyIO FS Series controller IP address is 192.168.10.12.
Changing the IP address can be done through CP T tools and also web browser.
CPT tools
Step 1
Login to the FS32 via Sedona workbench. Locate the object
“IP”
under the Service folder.
Step 2
Click IP object and view properties at the side bar.
At the
newIpAddress
,
newSubnetMask
and
newGateway
property, enter your new IP address.
Inserting invalid values to these properties will brick the network settings.
A restore factory default is required if controller unable to connect.
currentDhcp
and
newDhcp
property only supported by FS Series controllers.
