Before first use
14
Mounting the wall bracket
WARNING!
Risk of electric shock, short circuit and damage to
property!
If you damage electrical lines, water lines or heating pipes while
drilling holes in walls, this may result in electric shock, cause a short-
circuit, water damage or damage to heating or water systems.
− Before drilling, ensure that there are no electric lines, water
lines or heating pipes running through the desired area.
− Observe the safety instructions for the drill you use.
• You can use the screws and wall anchors contained in the
pack contents if they are suitable for your wall composition.
• Before installation, check which installation material is suit-
able for your wall.
1. Select the installation site for your wall bracket
6
(see
Fig. A, C
and
D
).
Ensure the following in the process:
• that there is a properly installed socket nearby you can use to connect
the power adapter
12
to the power supply. Thus, you can charge the re-
chargeable batteries of the handheld vacuum cleaner in the wall bracket.
• that there is enough space above the wall bracket so that you can com-
fortably place the handheld vacuum cleaner on the wall bracket.
2. Hold the wall bracket up to the desired location and use the mounting holes
19
to mark the positions of the drill holes.
3. Use the marks to drill the drill holes.
4. Insert the wall anchors
7
in the drill holes.
5. Use the two screws
8
to fix the wall bracket on the wall.
Using the wall bracket as a stationary charging station
If you mount the power adapter on the wall bracket and
connect it to the power supply, you can use the wall bracket as a
stationary charging station.
− Insert the device plug
10
in the designated recess on the wall bracket
6
so that the two guides on the wall bracket extend into the grooves on the
device plug (see
Fig. D
).
− Plug the power plug
11
into a properly installed socket.
ZUR
FREIGABE
