AFTER SALES SUPPORT
10
1 866 558 8096
AFTER SALES SUPPORT
11
1 866 558 8096
Robotic Vacuum
Operation and Maintenance
Robotic Vacuum
Troubleshooting
Replacement of Battery
Remember to turn the power switch to the OFF position on bottom of vacuum before
taking out the battery.
Using a philips head screwdriver remove the 4 screws holding the battery door in place.
Open the door and take out the battery. (See Fig. 9) Plug new battery into connector on
base and screw the door back into place. (See Fig. 10)
WARNING
1.
Don’t place the battery in a high-temperature environment above 1130F
(450C) or in water.
2.
Don’t forget to take out the battery if discarding the vacuum.
3.
The battery should be recycled safely. Don’t discard it freely or throw it
into a fire due to the possibility of explosion.
Troubleshooting
Problem
Solution
The Vacuum is louder
then normal
The Vacuum does not
charge automatically
The Vacuum doesn’t
work or cleans poorly
1.
Check whether switch on bottom of
vacuum is in ON position.
2.
Check whether the dustbin, filter and
intake are clean.
1.
Check whether the charging adaptor is
connected properly.
2.
Check if the LED buttons are flashing.
1.
Clean the dustbin and filter.
2.
Check whether the brush or side brush is
dirty or stuck.
Figure 9
Figure 10
