EasyFold PRO 2.0, Owner'S Manual

Page: 22 / 24

Troubleshooting
The following represents the most common questions asked about the EasyFold PRO in regards to
everyday use; check this helpful guide or the operator’s manual for more information or for any
questions about using the EasyFold PRO 2.0:
Questions Possible Causes Answers
Why is there NO
POWER to the EasyFold
PRO? 1. System power is not
connected.
2. Controller system CPU and
joystick are not connected.
3. Battery power is too low. 1. Connect the battery.
2. Ensure all connections
between Joystick, CPU and
battery are securely tightened.
3. Charge the battery.
Why is the EasyFold
PRO noisy or vibrating
when turning? 1. Speed is set too low.
2. Motor is damaged. 1. Raise the speed. At low
speeds, the motor may sound or
feel strained.
2. Replace the motor.
Why can’t I charge the
battery? 1. Charger light does not turn on.
2. Charger light is always green.
3. Charging time is stopped
before full charge is complete 1.Replace the charger. 2.Battery
is not connected, or may need to
be replaced.
3. Capacity of the battery
decreases over time. This is
normal.
Why can’t I connect the
controller? Connector pins (male) on the
controller have become bent and
misaligned with holes (female) on
the CPU connector. Using a small tool, carefully
straighten the connector pins
(male) on the controller to align
with holes (female) on the CPU
connector.