4
Assembly Overview
Models
All assembly instructions are consistent throughout all cubicle models. The green Calm
model is used for illustration purposes. All models are available in three colours, seen
below.
Important Assembly Notes
•
The top and bottom pipes for the Calm model are the same, but for the purpose of
the manual they will be labelled separately, just to account for the different top
and bottom pipes in the Dream and Siesta models.
•
The top and bottom clamp for the Dream and Siesta models is the same, but for
the purpose of the manual they will be labelled separately, just to account for the
different top and bottom clamps in the Calm model. Refer to Page Z for more
detail on the clamp styles for each model.
•
The positioning measurements in the appendices are applicable to the Set in
Concrete, Bolt To Floor and Wall Mounted configurations, but for illustrative
purposes only the Set In Concrete model is used.
•
All measurements are EASYFIX™ recommended and are just a guideline f
or the
assembly. Beds may vary in size and look but the measurement recommendations
for positioning remain consistent.
ream
alm
Siesta
