Door Activation Pads
The door activation pads should be installed within a range of 25 meters and 1.5 meters above the
floor.
Step 1
- Using a Philips Head screwdriver, undo the 2 stub screws.
Step 2
- Remove front Steel Plate.
Step 3
- Using Philips Head screwdriver, remove 2 silver Pan Head screws from ‘Inner Plate
Assembly’.
Step 4
- Remove Inner Plate Assembly.
Step 5
- Using a 4mm Drill bit, drill pilot holes in Door Activation Pad Back plate of Door Activation
Pad.
Step 6
- Using a drill-but appropriate to the wall screw, drill into the wall. Insert rawl plugs if
necessary.
Step 7
- Using 2 wall mount screws from
Bag 3
,
use Philips Head screwdriver to fix Door Activation
Pad Back plate to the wall in the pre-drilled holes.
Step 8
- With the spring facing towards you, match up Inner Plate Assembly taking care to ensure
no wires are caught.
Step 9
- Using a Philips Head screwdriver, fix the Inner Plate Assembly to the Door Activation Pad
Back plate using the 2 silver Philips Pan Head screws previously removed.
Step 10
- Fix Front Plate to Activation Pad.
Repeat process for pad on the other side of the door.