Copyright 2015, EasyAwn, LLC
Page 4
EA-INST-C060403
Ensure the back bar is level and fasten the clamps tightly to the wall.
Review the completed EasyAwn
™
assembly as shown below.
2
1
4
7
6
5
3
Item Description
Item
Description
1
Back Bar
5
2
Cover
6
Return Arm
3
Valance
7
Rafter
4
Front Bar
8
Center Return Arm (not shown)
Slide the rope sewn into the back edge of the cover into the back bar on the wall. You may need to use
a screwdriver to slightly open the channel at each section if the fabric catches on the edges.
Assemble the front bar and slide it into the front pocket of the cover.
NOTE: On the 8’, 10’ and 12’ Wide EasyAwn Classic Awnings
there is a center return arm as shown. Make sure the
threaded rafter holder is above and the tab with he hole in it is
below the front bar
