Copyright 2015, EasyAwn, LLC
Page 3
EA-INST-C060403
Item Description
1
Rafter
6
Clamps
2
Return Arm
7
Front Bar
3
Center Brace – 8’ – 12” Only
8
Front Bar Center – 8’ -12’ Only
4
Back Bar
9
Center Return Arm – 8 ’- 12’ Only
5
Back Bar Center – 8’ – 12” Only
(item 9 is shown below)
Assembly and Mounting of your new EasyAwn Awning
There are 2 options for installing your new Easyawn Awning.
Installation Option 1
Assemble the awning on the ground and then attach the awning to the home.
Installation Option 2
Assemble the awning on the home as shown in the following steps.
Assemble the two back bar pipes (three on the 8’). Insert the grooved post into the mating tube.
Connect and secure with the set screw.
Position the back bar to the correct height above the window or door. Mark the center of the window or
door to make sure the awning is centered. For 8’,10’ and 12’ awnings there is a return are that need to
be mounted at least 3 inches below the back bar to keep the front bar level.
